Solar modules are mounted on flat, solid surfaces like concrete slabs or smooth asphalt. Most of the time the solar modules are mounted on galvanized steel surfaces or galvanized aluminum surfaces to prevent galvanic corrosion. It is important to have the galvanized surface as flat as possible because when the solar array is traveling from one location to another, the angle of the mounting point must be carefully considered. Galvanized steel and pre-galvanized metal surfaces are commonly used as solar module mounting structures because of their excellent resistance to galvanic corrosion.
Solar module mounting structures are widely used in homes and small-to-medium-sized commercial/ Industrial buildings. They can provide a low-cost way to add effective storage and distribution of electrical energy to homes and businesses. Solar panels are a great low-cost way to convert electricity into usable energy for your home. However, solar panel structures require an optimum level of exposure to direct sunlight during the day in order to maximize the conversion of solar energy to electricity. The panel must be mounted on a structure that has an even, flat surface. This allows the sun’s rays to fully heat up the metal or aluminum that is being covered by the panel, which produces a high-voltage current.
There are several different types of solar panel mounting structures. One type is the post-galvanized steel structure, which is similar to galvanized metal. This type of structure uses thick posts that are galvanized at the top and bottom for extra resistance to galvanic corrosion. The posts are then cemented together and sealed to make sure the post-galvanized structure stays rigid while housing solar panels.
The second type of mounting structure is the semi-permanent aluminum or stainless steel framing, which has built-in insulation. This design also uses posts and frames that are galvanized. Semi-permanent panels are great for temporary structures such as workshops, storage sheds, and storage cabinets. They can be removed and replaced when needed, minimizing construction time for a job.
Solar panel mounting structures that use lightweight, portable stands are perfect for off-site applications, allowing workers to quickly set up or dismantle the system without taking up too much space. These lightweight stands can be easily assembled or disassembled as needed, saving even more time. The lightweight stands typically contain storage racks underneath, providing multiple ways to organize working equipment and materials. Some racks can be used as stands, and some racks can be attached to larger structures, such as buildings, for permanent storage.
These types of structures are especially useful for remote sites, where access to power plants and electrical wiring may be limited. Because of their flexibility, the portable structures can even be moved around on the site to match the landscape. The portable structure is easy to install and can usually be disassembled if not in use. Off-site mounting means less time spent preparing the site for a solar panel’s array, and less money spent on construction expenses. Solar module mounting may be the perfect solution for your power plant.
