Table of Contents
123 Installing HP Printer Driver
Installing the printer driver is the main step when configuring the printer. When HP releases new printer drivers, it will have an impact on your printer to explore the main functions of the printer. Perform the hp printer installation process and make your printer run efficiently. Don’t miss any step of our website to achieve the perfect driver for your HP printer. Each time you update the printer driver, you will add some valuable features to your printer.
Step 1: Unpacking the Printer
Find the right place to store the HP printer and place the printer package. Use the steps provided below.
• Open the package after stripping the tapes in the printer box for 123 hp settings.
• Go to the 123.hp.com/setup web page, where you can find the configuration procedures.
• Check the accessories that came with the HP printer with the help of the list.
• You can find the checklist for printer accessories in the package and on the website.
• Remove the tapes and protective paper from the scanner lid, ink cartridge and paper tray.
• Look at all the embellishments that accompany the printer package.
• Pick up the packing tapes and the box in the garbage box and put them in the recycle bin.
Step 2: Connect Power Supply to the 123 HP Printer
Establishing the electrical connection to the printer is the second step after removing the HP printer from the box.
• Check the connection source before connecting it to the HP printer.
• Make sure you have kept the HP printer somewhere near the power outlet.
• Always use the direct connection supply to obtain uninterrupted power.
• Connect the power cable to the printer and the computer.
• Make sure your printer obtains continuous power supply without fluctuations.
• Once everything is set to obtain the power supply, use the power button to turn on the printer.
Step 3: Installing Ink Cartridges
To achieve the correct installation and alignment of the ink cartridges, use this set of instructions without fail.
• You will get the official HP ink cartridges alongside your HP printer packages.
• The HP printer must remain in the active state while planting the ink cartridges.
• Turn on the printer and hold up until it never again delivers clamor.
• Peel off the protective strip from the ink cartridge. Place the ink cartridge in the slot holding it in the black plastic area.
• Hold it on the sides of the cartridges and slowly insert it into the slots.
Step 4: Load Paper in the 123 HP Printer
The basic steps to load paper in the paper tray are detailed below. Tutorial sequentially to add paper.
• Examine the paper size you want to insert in the paper tray before installing them.
• Unlock the paper tray and check the packing materials again.
• If you find packing material inside the tray, remove it. And then, insert the well-arranged paper.
• Insert a stack of paper until it overflows. Modify the paper advisers to fix the papers as needs are.
• After inserting the paper, close the paper carriage door and start printing.
