How To Resolve Canon Printer Error Code 5800 Easily?

To print out your important documents, you can try the best Canon printer that is known for the best printing services. Through the help of this machine, you can easily print all the documents in a few minutes. But such as other printing devices, Canon printer occurs some issues such as Canon printer error code 5800. This is a common error that refers to the waste ink counter reset. The error reflects, the green and orange light blinks alternatively and restricts the printing machine from printing. To know how to vanish Canon printer error code 5800, you can read this article. To solve this error you need to apply the best troubleshooting steps. For your help, we mention some steps that are mentioned below. If the given solutions are not compatible to solve your problem, then don’t worry. The experts are always here to help. They will guide properly. To get instant solutions you can contact us via our toll-free Canon printer support number +(1)-888-846-5560.

Easy solution to resolve Canon printer error 5800

If you are suffering from this error, then you need to remove it as soon as possible. To get eliminate this type of issue, you can apply the below-mentioned step without any trouble.

Solution 1. Remove the waste Ink absorber 

• Press the Power key: With the Canon printer controlled off yet associated with a power switch. Click the “ Power” catch while squeezing and holding the “ stop/reset” catch
• Click “ stop/reset” key: When the power is lit, click “ Stop/ Reset” pick many times. While squeezing and holding the power catch.
• Move into a Service mode: While discharging the “ Power catch and the “ stop//reset” key, the printing machine will turn into an administration mode.
• Click “ Stop/Reset” key: At the point when the on/off lights in green, click the “ stop/ Reset” catch the predefined number of times as indicated by the capacity recorded in the table underneath. 
• Switch on Canon Printer: Switch off the printer and then after 5 to 10-second switch it on.

Now check the error code 5800 is solved or not. If yes, then move to the next Method.

Solution 2. Enter Canon printer in service mode

• At first, switch your canon multifunction printer on.
• After that, press the menu key on the printer then put your group printing machine in administration mode. To do this, you should press the “ Sweep” Duplicate “ and” Output “ catches in that accurate request. It will be ideal if you consider the administration mode menu entirely in English. 
• Now, click + button until you have reached the “counter access” option then press ok.
• A page counter will appear on your printer’s screen. The number on it indicates the number of pages. Then press, OK.
• After that, you will need to click the “ Copy” key.
• Use “-button” to lower this score to zero. Then press “ Ok” key
• Then, stop once get the “ Scan Page Count” option
• Set score back to 0
• Now, click the “ stop/Reset” key and then switch off “ stop/Reset” key
• In the last, disconnect the power cable and wait for a few seconds then connect in once again.

Hopefully, your problem has been solved successfully. In case, if the problem persists after applying the above-mentioned steps, then you need to contact the professionals. They will guide you properly and give you one of the best solutions. For your help, Canon printer technical support is available 24*7.