Color printers are great, but some users reported that their Brother Printer Not Printing Yellow. This issue mostly has to do with the ink level but can be something else as well. If you are also troubled by this issue, here are a couple of troubleshooting tips to make your printer, print yellow. Printer Not Printing Yellow issue can occur if an ink cartridge(s) is or was installed in the wrong position (slot) in the machine. When a cartridge is installed, the ink tube system is filled with the ink from the cartridges, to prepare the machine for printing.
Brother Inkjet Printers are renowned for having the problem of the black cartridge not printing. This has been a common issue with Brother Inkjet printers for as long as I can remember. No-one, (including Brother) seems to know exactly why this problem is so common and even why it has continued to plague Brother printers for so many years. In this article, I want to first start with the main reasons that could cause this problem to occur followed by the solutions.
Overall Brother inkjet printers are very reliable and if used regularly and correctly then very few issues will occur. Brother printers work perfectly well with generic ink cartridges, in fact, there should be absolutely no difference whatsoever in both operation and print quality using non-genuine cartridges as long as they are good quality generic Brother cartridges.
What can cause a Brother printer to not print black?
There are quite a few scenarios that can stop your Brother printer from printing in black. Here are some of the main reasons, including a few things to check before getting too carried away with the situation. Remember that issues will almost always begin when a new cartridge is installed. DO NOT blame the cartridge as it is almost NEVER the cartridge which is at fault even though this is when the problem may have first appeared.
1. Check that the “Breather Tape” on the top of the cartridge is fully removed.
The breather tape or sometimes referred to as the shipping tape MUST be removed before installing the cartridge. If this is not removed then the ink remains vacuum sealed in the cartridge and it will not come out under any circumstances.
2. Make sure that you install a new cartridge well before it runs dry
When your printer starts warning you that the Black cartridge is getting Low and needs to be replaced it’s OK to keep printing for a while but not for too long. I know that we all want the most from our cartridges but if you print too long and the ink runs very low then you will start introducing air into the print nozzle.
When air starts to get into to the nozzle or the lines going to the nozzle then the printer will stop printing in black. It may not fully stop and you may simply get lines through the printing. This indicates that some of the nozzles are blocked but not all of them.
Also when you print with a near empty black cartridge then the air going into the print nozzle will start to dry the ink that is already in the nozzle. If you continue to print like this for a long period of time then you may even permanently damage the printhead. It’s kind of like running a car for too long without coolant in the radiator.
There have been many articles written about sticking electrical tape over the small window at the front of your Brother cartridges so that you can keep printing and the printer then cant tell if the cartridge is run out of ink. We’ve all don’t this before but let me tell you it WILL eventually kill the printhead if you keep doing it long enough.
3. Using very low quality generic ink cartridges
Brother inkjet printers, like any other printer brand uses specific inks in their printers designed to perform correctly with their own machines. Due to the massive availability of generic cartridges there is a huge difference in quality between one generic ink and another.
If the viscosity of the ink is not correct and similar to the Brother inks then various issues can occur. The ink needs to flow at the correct rate and also needs to be formulated to NOT CONGEAL or dry too fast. Printer inks actually contain various chemicals which prevent the ink from drying. This doesn’t effect them drying on the actual paper but it does prevent it from drying out in the printer itself.
At Ink Hub we have done stringent tests over the years to check the drying rates of various non genuine inks. This has enabled us to provide generic cartridges which we believe are the best on the market.
If the cartridge is in the wrong position the tube will fill with the wrong color. If you need a detail solution about this problem and resolving it you can try the steps and solution given below in the blog as if you are still not getting satisfied with the solution we are all here provide you guaranteed support to resolve your problems related to brother printer support problem we had an amazing team provide you best quality of services. We provide a tremendous solution and one hundred percent solution in a specific period at a very affordable price. As we do also carry the remote access as per the seeking of the customers by their permission. We carry the global presence and have offices in UK, USA, and Canada. Call us for any technical help.
As we the team are highly qualified and trained at this. We plight the best quality of services for brother printer problems they work round the clock and have the profound technical knowledge to quickly identify your Printer Won’t Print Yellow Color Problems. Our charges are extremely inexpensive to meet your preconditions so, please do not hesitate to call brotherprintersupport247 team Number and remain up-to-date with them.