If you want to get rid of Epson Printer Error Code E-01, then you can perform the below recommended steps. If still, you find any difficulty, then you can contact Epson printer support.
Unified printing can be disturbed by the error codes and messages popping up in your printer. Epson Error code E-01 is one of the usual printer errors that you can face any time during the printing session. This error is sensed by the Epson manual as a lethal error. It means that the printer is not able to finish the self-test. When you turn on your printer, it starts to check all its components and systems. The error exactly encounters when the printer begins to boot after self-starting the process. This is the time when it causes the E-01 error code.it completes
Here are some of the steps that you can perform to overcome this error. Perform this wisely to avoid any kind of disturbance. In case you need any assistance, Experts will try to sort out all your technical issues in flash.
Typical reasons that lead to Error Code E0-1
After a certain time, your printer loses its sufferance. The generation of the error code is a sign that internal applications are not working properly. Too much use of printer can decrease the efficiency of the printer over a certain time. If you are dealing with this error code frequently, have a look at the reasons that might be responsible for this issue.
- The position of the CD tray gets unsettled that lead to error code E-01.
- Messy cable wires can avoid appropriate power supply to the printer which may delay the self-start process.
- Sometimes, the printer transportation locking process is faulty. The Problem in storing the lock in suitable position upsurges the risk of encountering this error.
- Printer drivers can be archaic, which leads the negative work of your Epson printer.
- Check whether you have CISS installed in your printer or not.Because of CISS,it makes the carriage stops moving. As a result of which, you might go through several problems.
Crucial Solutions to fix this error code
Turn on/off your printer power button
First of all,quickly turn off the power of your Epson printer and wait for five minutes.After that, switch on the printer again and confirm if this time it completes its self-start process or not and start working properly.
Positively it would fix the Epson printer error code E-01,if still, it is facing error, then go to step
Managing the lock of your printer
Confirm that whether you have removed the transportation lock of your printer or not,so managing the lock can be a great solution. If the problem is not solved, then move to step
Managing the CD tray of your printer
If your printer’s CD tray is in the eject position then, ensure that you have pushed the CD Tray button to withdraw the tray to its original storage position.
Keep in mind that never push or pull the CD tray in an incorrect direction.
Switch off the power of the printer and also confirm that there is no paper jam in the printer.
Expectantly on restarting the printer, your problem gets solved, if the issue persists then move to step
Checking the cartridge of your printer
If the printer is installed with the CISS, in that case,ensure that its carriage is easily movable towards the left and the right side.
Make sure that the printer’s upper scanner part should be tightly closed.
Perform a check-up process
Make a complete check of your printer if the above step does not resolve your printer error code.
If an operator is working with the printer that is installed with CISS then, it is the possibility that there are ink tubes avoiding the carriage to move from left to right.
So in this case, install original Epson ink cartridges.And after installing, run the printer.
Access the cartridge of your printer
In the concluding step, to use the cartridge loading area while the printer is in off-mode,move the carriage right away from the top.
At last, carefully arrange the printer and then, clean all its paper feed sensors, optical sensors, encoder strip as well as the disc encoder.
What to do if I’m unable to process further?
If you are still facing the problem, then you can contact Epsonprintersupport247 where Epson technicians will deal with your problem.