Despite the awesome performance of HP printer, users often encounter frequent error codes and messages. HP Printer Error code 1111 is normally displayed on the front panel of your HP Designjet Printer because a fault has been detected with the trailing cable.for resolving it you can Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer.
To increase your work efficiency, perform the following steps:
Although HP printers are designed to serve your purpose, the appearance of error codes and messages are not unusual. If the printer is unable to perform desirably, it is indicated by the appearance of error codes and messages.
You may do the follow procedure-
Use the power switch at the rear to turn off the printer, then disconnect the power cord. Reconnect the power cord, then turn on the printer.
Remove all printheads, inks & paper. Try re-starting the printer.
Over time the trailing cable on some HP Designjet models can rub against the chassis causing wear & eventual failure. If the trailing cable is visible on your printer, check for visible signs of wear on the trailing cable.
Need to follow these steps to resolve HP Printer Error code 1111
- Turn the printer off then on.
- If the error persists, send an on-site technician to perform the remaining steps.
- From the control panel, enter Tech Mode and execute the LSU motor tests:Menu > # > 10043616 > Menu > Tech Menu > Diagnostics > Engine > Test Routines > 110 – LSU > 0000 – LSU Mot 1Rdy & 00602 – LSU Mot 1Run
- If there is no sound, remove the platen unit. Check if the LSU harness is connected on the main board properly.
- If it is OK, remove the top cover. Check if the LSU harness is connected on the LSU board properly.
- Check if the LSU harness is defective. If needed replace it (HP Part #: SAM-JC39–01996A).
- Reconnect the LSU harness and then execute the LSU motor test again.
- If the error persists, replace the LSU (HP Part #: SAM-JC97–04301A).
- If the error persists after replacing the LSU, replace the Main Board PBA: M436n/M436dn SAM-JC92–02607G M436nda SAM-JC92–02607H
Even if you are getting this error don’t you worry we have the appropriate and detail solution in an easy way you just have to visit us as and follow our blog in which the easy and detail solution is given step by step if you are still not getting satisfied with the solution we are all here provide you guaranteed support to resolve your problems related to printer error problem we had an amazing team provide you best quality of services. We provide a tremendous solution and one hundred percent solution in a specific period at a very affordable price. As we do also carry the remote access as per the seeking of the customers by their permission. We carry the global presence and have offices in UK, USA, and Canada. Call us for any technical help.
As we the team are highly qualified and trained at this. We plight the best quality of services for Hp printer problems they work round the clock and have the profound technical knowledge to quickly identify your Printer Error 1111. Our charges are extremely inexpensive to meet your preconditions so, please do not hesitate to call printererrorsupport team Number and remain up-to-date with them.