Uncategorized

Preparation Of Bar Bending Schedule

Written by retail365cloud
Share This Link
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
TMTshapes

Schedule of bars (or bar bending schedule) is a list of reinforcement bars, with regard to a known RCC work item, and is offered in a tabular format for easy visual reference. This table sums up all the required specifics of bars as diameter, length of each bent, a total length of each bar, a shape of bending & straight portions, number of each type of bar and angles of bending. This statistics is a great benefit for preparing an estimate of quantities.

Figure 1 depicts the shape and proportions of hooks and bends in the reinforcement bars these have adhered to the standard proportions:

(a) Length of one hook = (4d) + [(4d+ d)]  where, (4d+ d) denotes to the curved portion = 9d.

(b) The additional length (la) that is presented in the simple, straight end-to-end length of a reinforcement bar due to being bent up at say 30o to 60o, but it is generally 45o) = l1 l2= la

Where,

formula1

formula2

Fig 1: Hooks and bends in Reinforcement

Giving different values to respectively), we get different values of la, as shown below:

formula3

Figure 2 shows the technique to reach the length of hooks & the total length of a given steel reinforcement.

formula4

Fig: Typical Bar Bending Schedule

For more details please visit: http://struccore.com/2016/05/20/preparation-of-bar-bending-schedule/

 

______________________________________________________________________

Schedule of bars (or bar bending schedule) is a list of reinforcement bars, with regard to a known RCC work item, and is offered in a tabular format for easy visual reference. This table sums up all the required specifics of bars as diameter, length of each bent, a total length of each bar, a shape of bending & straight portions, number of each type of bar and angles of bending. This statistics is a great benefit for preparing an estimate of quantities.

Figure 1 depicts the shape and proportions of hooks and bends in the reinforcement bars these have adhered to the standard proportions:

(a) Length of one hook = (4d) + [(4d+ d)]  where, (4d+ d) denotes to the curved portion = 9d.

(b) The additional length (la) that is presented in the simple, straight end-to-end length of a reinforcement bar due to being bent up at say 30o to 60o, but it is generally 45o) = l1 l2= la

 

About the author

retail365cloud

Leave a Comment